上海琼凯实业有限公司官方网站

How to Make Your Own Dog Mask – The Basics

In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that looks like a cone. The main thing here is to be realistic with what type of paper plate that you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can ensure that nothing will leak when you place the mask on. Make sure the edges are cut so that the edges aren’t sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t wind up with smudges or smears on your dog.

Then dog food best value it’s time to glue the mask on your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and then fold it over. Be certain it’s quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the surface of your dog. Do not make the folds too large or else it could look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are level and be sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask as your pet security, you’ll have to do some sanding to make certain it’s safe on your dog. You can do it by sanding off any excess paper which might have been eliminated from your mask.

标签: